About; Introduction; Figure 1 Can Fd Lin Gateway; Figure 2 Block Diagram - MACH SYSTEMS CANFD-LIN-GW User Manual

1 About

This document describes the use of the CAN FD LIN Gateway.
P/N: CANFD-LIN-GW
Web: https://www.machsystems.cz/en/products/embedded-networking/gateways-and-bus-
converters/canfd-lin-gateway

2 Introduction

The CAN FD LIN Gateway is a freely programmable router/data-logger/simulator that features
two CAN FD channels, a LIN channel, and a RS-232 port. The interface also offers a microSD card slot
and multiple digital/analogue inputs and outputs, which makes it suitable for a broad range of use-
cases such as protocol conversion, network bridging, data logging, rest-bus simulation, and external
peripheral control and monitoring.
Firmware can be developed in C/C++ and can be transferred into the device over USB, CAN, RS-
232, or a standard ICSP SWD interface, which also offers code debugging. The device is based on a
STM32G4 Arm Cortex-M4 MCU and comes with a free-of-charge IDE, GNU C/C++ compiler, and
programming examples.
MACH SYSTEMS s.r.o.

Figure 1 CAN FD LIN Gateway

Figure 2 Block Diagram

www.machsystems.cz
info@machsystems.cz
CAN FD LIN Gateway - User Manual
Page 4 of 18