Figure 7 J5 - St-Link Swd Connection And Pinout; Figure 8 Stm32Cubeide Debugger Configuration - MACH SYSTEMS CANFD-LIN-GW User Manual

An ST-LINK v2 or v3 debugger and a TagConnect TC2030-NL header [1] is needed.
p/n: TC2030-CTX-NL-STDC14
Please make sure SWD Interface is selected in STM32CubeIDE project configuration as shown in
Figure 8.
MACH SYSTEMS s.r.o.

Figure 7 J5 - ST-LINK SWD Connection and Pinout

Figure 8 STM32CubeIDE Debugger Configuration

www.machsystems.cz
info@machsystems.cz
CAN FD LIN Gateway - User Manual
Page 14 of 18