Table 1 Technical Specification; Figure 3 - Product Photos - MACH SYSTEMS CANFD-LIN-GW User Manual

Electrical
Power
Consumption
MCU
Transceivers
Mechanical
Connectors
Buttons and switches
Dimensions (L x W x H)
Weight
Operating temperature
Protection
Placement

Table 1 Technical Specification

Figure 3 - Product Photos

MACH SYSTEMS s.r.o.
External 7 - 30 V DC with polarity protection over DSUB connector
USB-powered over Micro-USB (not for LIN bus)
100 mA @ 12 V (approx. 1 W)
Note: When no digital output (DO1-DO4) is being driven.
STM32G483 (Arm® 32-bit Cortex®-M4) with DSP and FPU;
170 MHz, 512 KB Flash, 128 KB SRAM
CAN-FD: MCP2562FD
LIN: MCP2003B
1 D-SUB9M
1 D-SUB9F
1 MicroSD slot
1 Micro-USB
2 DIP switches
1 Tactile switch
108 x 54 x 30 mm
85 g
-20 to 70 °C
IP20
Table (adhesive pads included)
DIN-rail mount (clip sold separately)
www.machsystems.cz
info@machsystems.cz
CAN FD LIN Gateway - User Manual
Page 6 of 18