Quick Select Menu; System Operation - Chacon 34543 Quick Start Manual

Wireless camera

Hide thumbs

Table Of Contents

Table of Contents

Available languages

B. Installing your camera

1. Secure the camera stand to a stable surface, celling or wall mount using three pcs screws.

2. Loosen the thumb screw of the camera stand and secure the camera body to the bracket.

3. Screw the antenna into rear of the camera.

4. Connect the supplied power adaptor to the camera and the power source. The RED LED

will light up which indicate the camera is ready for setup.

SYSTEM OPERATION

Main Menu

1. Tap

to extend quick select menu.

2. Tap to

enter main menu

1.Camera Setup: Pair camera and video quality.

2.Recorder Setup: Setup recording settings such as

date, recorder type, and motion area.

3.Event list: Event video playback.

4.System Setup: Setup system time, power saving

mode, and restore default system settings.

5.Storage Setup: Management storage

Pair the camera to the receiver

If you have additional cameras disconnected with receiver, follow steps below to pair:

1. Tap the camera setup icon to access the camera pairing screen.

2. Select the Camera channel (Camera 1/2/3/4).

3. Tap the "Camera Pairing" icon.

4. Within 35 seconds, press and hold the pairing button on the back of the camera for

5 seconds. The Green Link LED will light up which indicate the camera have been paired successfully.