Unit Characteristics; Pulse Output - Horizon Fitness Autometers Systems HT-100 Manual

1. Unit Characteristics

1.1 Unit Characteristics
MID Approved B & D
Multifunction KWh, Amps and Volts etc.
100Amp direct connected
Multi tariff
RS 485 Modbus output ( Autometers V.6 )
Two Pulse outputs (1 Programmable)
Large display with back-light
Password protected
Two modules wide

1.2 Pulse output

The meter provides two pulse outputs. Both pulse outputs are passive type.
Pulse output 1 can be set to generate pulses to represent total / import / export kWh or kVarh.
The pulse constant can be set to generate 1 pulse per:0.001 (default)/0.01/0.1/1kWh/kVarh.
Pulse width:200/100/60ms
Pulse output 2 is non-configurable. It is fixed up with active kWh (Imp). The constant is
1000Imp/kWh.
1.3 RS485 Serial-Modbus RTU
RS485 serial port with Modbus RTU protocol (Autometers V.6 protocol) to provide a means of
remotely monitoring and controlling the unit.
1.4 Tariff Setting
The tariff settings are normally done in the factory by means of the RS 485 Modbus. Four tariffs
and ten time segments can be set with the natural day.
2
autometers.co.uk