2.4.5 Pulse Output 2 (Constant)
Default: 1000
Options: 1000 / 100 / 10 / 1
Press the Enter button, the red digits will flash.
Press the scroll button to change the option. Once the new pulse constant
option has been selected, press the Enter button to confirm the setting.
2.4.6 Pulse Duration
Default: 100ms
Options: 200 / 100 / 60ms
Press the Enter button, the red digits will flash.
Press the scroll button to change the option. Once the new pulse duration
option has been selected, press the Enter button to confirm the setting.
2.4.7 Demand Integration Time
Default: 15 minutes
Options: off (0) / 5 / 10 / 15 / 30 / 60 minutes
Press the Enter button, the red digits will flash.
Press the scroll button to change the option. Once the new DIT option has
been selected, press the Enter button to confirm the setting.
2.4.8 Scroll Time Interval
Default: 0 seconds
Options: 0 - 30 seconds
Press the Enter button, the red digits will flash.
Press the scroll button to change the option. Once the new scroll time
interval has been selected, press the Enter button to confirm the setting.
8
autometers.co.uk