Merry Products MPG-ACE030KIT Quick Start Manual

This is an Unfinished, Solid Fir Wood Adirondack Chair. It is HIGHLY RECOMMENDED that you treat the
chair with a WEATHERPROOF COATING (stain or paint) before use, and continued once a year, to
increase the life expectancy and maintain the look of the chair. Please consult with your local hardware
store on the weatherproof coating options for the chair.
• Cover the Adirondack Chair duing harsh weather to keep it from weathering.
• Rinse any panels with water to clean.
• When assembling MERRY PRODUCTS'™ ADIRONDACK FURNITURE, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
Right Arm
Left Arm
Rest (A1 R)
Rest (A1 L)
Right Front
Left Front
Leg (F1 R)
Leg (F1 L)
C1 C2
C3
C4
Back Rest Panels

NOTES:

Read all instructions before starting.
Do not completely tighten all bolts until the unit is fully assembled.

TOOLS RECOMMENDED

1
*Powerdrill
C1
# 13mm
- Place Back Rest Cross Beams in order.
- Insert (a) screws partially through Back
- Position screw ends on pre-marked center
MPG-ACE030KIT CHILD'S ADIRONDACK CHAIR KIT

CARE INSTRUCTIONS

CHAIR COMPONENTS

C5
C5
a
C3
a
C9
C10
Rest Panel C1, C3 and C5. See Figure 1.
points on Back Rest Cross Beams.
Back Support (E)x2
2
Figure 1
- Postition Back Rest Panels C2 and C4 into
Page 1
Supporting
Block(A2)x4
Arm Rest
Connection(D)x2
HARDWARE
a
(34 pcs + 2 spare)
b
(10 pcs + 1 spare)
c
(4 pcs + 1 spare)
d
(8 pcs + 1 spare)
*Powerdrill recommended
for assembly.
C4
a
C2
place with (a) screws and secure.
a
v.2.0