Merry Products MPG-AC02F Quick Start Manual

Foldable adi rondack chair with ottoman

Advertisement

Quick Links

Please che ck contents before assembl y. If a n y items are missing or dam a ged , do not tak e the unit bac k to
the stor e. Please call (416) 597-2291 f or customer se r vice and w e will s a v e y ou time by co r r ecting a n y problems.
The Adirondack Chair has been conditioned for outdoor use with an oil-based color stain. To maintain the
beauty and life expectancy of the chair, it is highly recommended that you treat the chair with a weather-
proof coating (wood oil stain or paint) once a year.
• Cover the Adirondack Chair during harsh weather to keep it from weathering.
• Rinse any panels with water to clean.
• When assembling MERRY PRODUCTS'™ ADIRONDACK FURNITURE, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
Right Arm Rest x 1
Left Arm Rest x 1
Back Rest x 1

TOOLS RECOMMENDED

# 2
Phillips
Screwdriver
# 13mm
M
E
FOLDABLE ADI RONDACK CHAIR WITH OTTOMAN
MPG-AC02F

CARE INSTRUCTIONS

COMPONENTS

Center Cross Beam x 1
Folding Bracket x 2
Bottom Cross Beam x 1
Base Bottom Support x 1
Seat Slat x 1
NOTE: • Read all instructions before starting.
R R Y
Front Leg Cross Beam x 1
Wooden pin x 2
• Do not completely tighten any bolts until the unit is fully
assembled and sitting on a level surface.
Weight Capacity up to 275 lbs.
page 1
HARDWARE
A
B
Front Legs x 2
M8x65
C
M8x55
D
M8x55
Seat x 1 u
4+1
4+1
2+1
v.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MPG-AC02F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Merry Products MPG-AC02F

  • Page 1 • Cover the Adirondack Chair during harsh weather to keep it from weathering. • Rinse any panels with water to clean. • When assembling MERRY PRODUCTS’™ ADIRONDACK FURNITURE, please handle all panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
  • Page 2 Figure 1 STEP 2 STEP 1 Attach Seat Slat and Base Bottom Support Attach the Center Cross Beam and Bottom onto Seat using 4 A screws. Align screws ends Cross Beam to the Back Rest using 18 with pre-marked points. A screws.
  • Page 3 STE P 5 STE P 6 Insert the Back Rest into the recessed holes of Attach the Folding Brackets to the Seat using the Folding Brackets. Secure using 2 C bolts. 2 D bolts. Reference the position of the washers. Reference the position of the washer.

Table of Contents