Xylem Lowara GHV1 Operating, Installation And Maintenance Instructions

Break Tank Cold Water Booster Sets
GHV1-4 Hydrovar Variable Speed
Operating, Installation and Maintenance Instructions
EC Declaration of conformity
Xylem Water Solutions UK Limited declare that the GHV Booster set conforms to the requirements of the
Machinery Safety Directive
Electromagnetic compatibility (EMC) Directive
Conforming to the UK Health & Safety Requirements
Water supply (Water fittings) regulations
Signed:
t
Clive Willmot
Introduction
This leaflet contains information to enable the safe installation and operation of the products mentioned.
The following instructions must be read and understood by all persons responsible for the installation, operation
and maintenance of this product.
Warning Symbols
Safety instructions where noncompliance would affect safety.
Safety instructions where electrical hazard is involved.
Safety instructions where noncompliance could cause damage to the equipment.
Instruction for safe use
This product has been designed for boosting cold water in potable water installations to the
operating conditions shown.
This product should not be installed until this leaflet has been studied carefully and understood.
Handling, transportation and installation of this equipment should only take place with the proper
use of lifting equipment. This product must be stored in a frost-free dry environment.
Noise Emissions
Operating limits Fluid temperature
Ambient temperature
Operating pressure
Protection class Motor and Electrical panel
Hydrovar
Position: Engineering manager
50Hz 2900 min-1
P2 (KW) 1 Pump
2.2 <70
3 <70
4 <70
5.5 <70
7.5 71
11 - 22 73
2006/42/EC.
2014/30/EU
2008 No. 1597
1999
Date: 20-04-2016 Revision B
LpA (dB+/-2) SV Pumps
2 Pump 3 Pump 4 Pump
<70 <70
<70 <70
<70 <70
<70 <70
74 76
76 78
0˚C to 40˚C
0˚C to 40˚C
Max 8bar, 10bar, 16bar depending on set type
IP55
IP55
1
<70
<70
<70
<70
77
79