Page 2
For correct operation, please read all instructions carefully. The DRCPX Remote Controller is a generic model, applicable to several kinds of units. Some functions of the remote controller are not available for all units. For more details please refer to the owner’s manual of the unit.
DRCPX Remote Controller User Manual 1. Safety Notices IMPORTANT. Follow strictly, or slight or medium damage may result to the unit or people. OPERATION IS PROHIBITED. Improper operation may cause severe damage or death to people. OBSERVE NOTICES. Improper operation may cause damage to people or property.
DRCPX Remote Controller User Manual Introduction This is a general use remote controller. It can be used with air conditioners that are not operating. For some functions that the model doesn't have, if you press the corresponding button on the remote controller, the unit will keep its original running status.
DRCPX Remote Controller User Manual • When selecting fan mode, just the air conditioning fan will blow, no cooling or heating. Press the FAN button to adjust the fan speed. Press the SWING button to adjust the louver angle of the fan.
DRCPX Remote Controller User Manual release the button. Note: may not be available. When the air conditioner receives this signal, the air conditioning fan automatically starts blowing. TURBO button • Under COOL or HEAT mode, press this button to go to quick COOL or HEAT mode.
DRCPX Remote Controller User Manual The outdoor temperature display is not available for some models. In that case, the indoor unit receives the signal, and the indoor set temperature is displayed. o The default is for the remote controller to display the set temperature when turning on the unit.
DRCPX Remote Controller User Manual • TIMER ON button can set the remote controller to timer ON. Press this button and the clock icon disappears. On the remote controller, the word ON starts blinking. • Press the UP or DOWN button to adjust the TIMER ON setting.
DRCPX Remote Controller User Manual Under energy-saving function, Fan speed is defaulted to Auto speed and it cannot be adjusted. Under energy-saving function, the Set temperature cannot be adjusted. Press the TURBO button, and the remote controller will not send the signal.
DRCPX Remote Controller User Manual 4. Operation guide 1. After putting through the power, press the ON/OFF button on the remote controller to turn ON the air conditioner. 2. Press the MODE button to select the mode: AUTO, COOL, DRY, FAN, or HEAT.
Need help?
Do you have a question about the DRCPX and is the answer not in the manual?
Questions and answers