Connecting The Print Server - Airlink101 APSUSB201W Quick Installation Manual

Section 1
Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any
other USB device to the Print Server may damage the Print Server.
Note: Do not plug the power cord to the Print Server until you have reached
Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other
end of the cable to a wireless router. You may disconnect the Ethernet cable after a wireless connection
is established.
Step 2 Make sure the printer is powered OFF, then connect one end of the USB cable to the USB port of
the Print Server and attach the other end of the cable to the USB port of the printer.
Step 3 Power ON the printer.
Step 4 Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Connecting the Print Server

Step 4 of this section.