Table of Contents
Advertisement
Step 6
Manually change the TCP/IP setting of your wireless computer to use a static IP address and
assign the appropriate IP Address, Subnet Mask, and Default Gateway according to your network. If
you do not know how to do this, it is recommended that you do not print directly to the Print Server, but
print through the wireless router instead.
Step 7
Configure your wireless adapter to Ad-Hoc mode, using the same SSID and Channel number
as the Print Server.
Note:
If you have enabled encryption on your wireless network adapter, you will also need to set the
identical encryption settings on the Print Server. For more information regarding how to set the encryption
settings, please refer to the user's manual on the provided CD.
You have successfully configured the Print Server for wireless printing in
Ad-Hoc mode.
For more information on how to use the Web Configuration Utility or setup for
Mac OS, please refer to the User's Manual in the provided CD.
Section 9
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
Advertisement
Table of Contents
