Hardware Installation; Connecting The Print Server - Airlink101 APSUSB201W User Manual

1-port wireless usb 2.0 print server

Hide thumbs Also See for APSUSB201W:

Table of Contents

2 Hardware Installation

Warning:

Only a USB printer may be connected to the USB port of the Print Server.

Connecting any other USB device to the Print Server may damage the Print Server.

Note:

Do not plug the power cord to the Print Server until you have reached

this section.

Step

1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and

attach the other end of the cable to a wireless router. You may disconnect the Ethernet

cable after a wireless connection is established.

Step 2

Make sure the printer is powered OFF, then connect one end of the USB cable

to the USB port of the Print Server and attach the other end of the cable to the USB port

of the printer.

Step 3

Power ON the printer.

Step 4

Plug one end of the power cord into the Print Server and the other end into an

electrical outlet.

Step 4

Table of Contents