Table of Contents
Advertisement
If you want to print directly to the Print Server (bypassing the wireless router), follow the steps below. You
should use a wired connection to configure the following wireless settings before unplugging the network
cable from the Print Server.
Note:
Your wireless computer may lose Internet connection if you set it to print directly to the Print Server.
Step 1
Go to Configuration, Wireless, and set the Connection Mode to Ad-Hoc.
Step 2
Rename the SSID of the Print Server or keep it as default.
Step 3
Set the desired Wireless Channel.
Step 4
Click Save.
Step 5
Click on Management and go to Wireless. Verify that the Connection Mode is Ad-Hoc and the
Link is Yes. Also verify that the SSID matches the SSID you have set.
Note:
If the Link does not say Yes, click on the Refresh button until it displays Yes.
Advertisement
Table of Contents
