Table of Contents
Advertisement
Safety
SAFETY SIGNS
SAFETY SIGNS ARE IMPORTANT
Safety signs or decals provide very important
information and instructions designed to alert you to
dangers and hazards that can be present during
operation of this equipment. However, safety sign
instructions must be read, understood and followed to
be effective.
REPLACEMENT OF SAFETY SIGNS
Safety signs or decals must be kept clean and
readable. If they become unreadable for any reason,
they must be replaced with an identical replacement
decal. Safety decals must also be replaced if parts are
repaired or replaced with new parts that do not
already include the necessary safety decals.
APPLICATION OF SAFETY DECALS
Surface preparation is very important for safety
decals to properly adhere. Grease, oil and dirt must be
removed and the surface must be smooth and dry.
Most decals have a split backing which is meant to be
removed from the split outward. To apply the decals
follow these procedures:
1. Position the decal in the proper location and hold
firmly over the largest portion of backing.
2. Use one hand to hold the decal in position, with the
other hand carefully roll the loose end over and peel
the backing outward. When the backing is removed
as described and shown (Fig. 1), with even and
gradual pulling, the decal will roll onto the surface
smooth and wrinkle free.
3. With the smallest portion of the decal attached, the
same procedure can be applied to the other half.
10
4. When the decal has been attached in place, use a
cloth or soft paper towel to burnish the decal onto the
cleaned surface. Work gently from the middle
outwards to avoid creating any wrinkles.
REPLACEMENT DECALS
Order replacement decals by part number through
your nearest dealer. Part numbers are printed on each
decal.
BALZER
INC.
Advertisement
Table of Contents
