Page 1
WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
Know Your Jig Saw Assembly & Adjustments Operation Maintenance Warranty Statement Exploded View and Parts List TECHNICAL DATA Model Number: 33606 Motor: AC 120V, 60Hz, 6.6A Variable Speed: 0 to 3300 SPM Wood Cutting Capacity: 4-1/4 in. (110 mm) Metal Cutting Capacity: 3/8 in.
SAFETY INTRODUCTION Thanks for purchasing the WEN Jig Saw. If you like a portable tool that can create both straight and curved cuts on different materials, then this is the right product for you. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instruc- tions may result in electric shock, fire and serious injury. To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood.
Page 5
GENERAL SAFETY RULES POWER TOOL USE AND CARE 1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a power source or carrying the tool. 2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.
SPECIFIC RULES FOR YOUR JIG SAW WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Read and understand all warnings, cautions and operating instructions before using this equipment. Failure to follow all instructions listed below may result in personal injury and tool damage. 1.
Page 7
SPECIFIC RULES FOR YOUR JIG SAW 11. MAKING ADJUSTMENTS. Always turn off and unplug the jig saw before making adjustments or changing attachments. Accidental start-ups may occur if the jig saw is plugged in during an accessory change. Do not touch the attachment immediately after operation.
ELECTRICAL INFORMATION DOUBLE INSULATION Double insulation is a concept in concept in electrical power tool safety, where two systems of insula- tion are provided. This eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.
KNOW YOUR JIG SAW Carefully unpack the tool from the packaging. Check all components and compare against the graph below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com.
Page 10
ASSEMBLY AND ADJUSTMENTS WARNING: To avoid injury from accidental startups, be sure that the tool is switched off and discon- nected from the power supply before inspecting the unit, making adjustments or changing accessories. INSTALLING/REPLACING THE JIG SAW BLADE (Fig. 1 to 3) The jig saw is capable of cutting a variety of materials when fitted with the correct blade.
Page 11
ASSEMBLY AND ADJUSTMENTS SETTING THE BLADE ORBITAL ACTION (Fig. 4) The blade orbit selector lever controls the blade orbit travel distance. There are 4 settings, indicated on the side housing (Fig. 4). At the 0 setting, the blade moves up and down in a straight line for smooth cutting. At the 3 setting, the blade moves in an elliptical stroke for fast, aggressive cutting.
Page 12
ASSEMBLY AND ADJUSTMENTS ADJUSTING THE BEVEL ANGLE (Fig. 8 & 9) The base plate of your jig saw is pre-adjusted to 0° for making straight cuts. You can create bevel cuts by setting the base plate up to 45° to the left or right.
OPERATION WARNING: To prevent serious injury, make sure all the instructions have been read and understood before operating this tool. Check that the power switch works properly before plugging the tool into the power supply. WARNING: Wear safety goggles at all times that comply with ANSI Z87.1. Use ear protection such as plugs or muffs during extended periods of operation.
To maintain maximum efficiency of the motor, we recommend inspecting the two carbon brushes every 60 hours of operation. NOTE: Replacement carbon brushes (Part No. 33606-019) can be or- dered at wenproducts.com. Only genuine WEN replacement brushes de- signed specifically for your tool should be used.
Page 15
LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.