Table of Contents
Advertisement
Quick Links
MODEL 20670, 20670BT
20V BRUSHLESS
JIG SAW
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-800-232-1195 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wen 20670BT
Summary of Contents for Wen 20670BT
- Page 1 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
-
Page 2: Table Of Contents
20V 5A Quick Charger (Model 20201Q) WEN plans to continue to add more items to our 20V line. For an up-to-date list of the 20V cordless tools compatible with the included battery and charger, visit wenproducts.com and search model number 20202 (2Ah), 20204 (4Ah),... -
Page 3: Welcome
INTRODUCTION Thanks for purchasing the WEN Jig Saw. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this op- erator’s manual and all the labels affixed to the tool. -
Page 4: Safety
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 5 GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
-
Page 6: Jig Saw Safety Warnings
JIG SAW SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. JIG SAW SAFETY 1. WORK ENVIRONMENT. Do not operate the tool in wet 6. - Page 7 JIG SAW SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. JIG SAW SAFETY (CONT.) 14. CLEANING THE TOOL. When cleaning a tool be care- 12.
-
Page 8: Electrical Information (Charger)
ELECTRICAL INFORMATION (CHARGER) DOUBLE-INSULATED CHARGER The charger’s electrical system is double-insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double-insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal components with protecting insulation. -
Page 9: Battery & Charger Safety Warnings
Never carry the charger by its cord or yank it by the cord battery chemicals. If the battery or charger are damaged, to disconnect it from the receptacle. Keep the cord away call WEN customer service at 1-800-232-1195 for as- from heat, oil and sharp edges. Make sure the cord will sistance. - Page 10 BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time. 2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently. 3.
-
Page 11: Before Operating
UNPACKING & PACKING LIST UNPACKING Carefully remove the jig saw from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. -
Page 12: Know Your Jig Saw
TOOL PURPOSE Easily cut curves and shapes in wood or metal with your WEN Jig Saw. Refer to the following diagrams to become familiarized with all the parts and controls of your jig saw. The components will be referred to later in the manual for assembly and operation instructions. - Page 13 ASSEMBLY & ADJUSTMENTS WARNING! To avoid injury from accidental startups, make sure that the tool is OFF and the battery is re- moved from the jig saw. INSTALLING AND REMOVING THE BLADE Fig. 1 1. Rotate the blade clamp lock (Fig. 1 - 1) counterclockwise to loosen the blade.
- Page 14 NOTE: The battery pack and charger are not included with model 20670BT. 1. Connect charger to a 120V, 60Hz AC outlet. The green light on the charger will illuminate, indicating that the charger is powered.
-
Page 15: Operation & Maintenance
OPERATION STARTING THE JIG SAW Fig. 3 1. To start the jig saw, press the power trigger (Fig. 3 - 1). 2. For continuous power, press the power lock-on switch (Fig. 3 - 2) while also pressing the power trigger. This will lock the power trigger in the ON position. - Page 16 OPERATION SETTING THE BLADE ORBIT Fig. 5 Use the blade orbit selector dial (Fig. 5 - 1) to set the correct blade orbit for your operation. Refer to the chart below for setting the blade orbit: Setting 0 - Hard materials such as metals or thin sheet metals.
- Page 17 OPERATION ADJUSTING THE BEVEL ANGLE Fig. 6 The base plate may be tilted to allow angle cuts up to 45 degrees in either direction. 1. Unlock the angle adjustment lever (Fig. 6 - 1) located on the back of the saw under the battery. 2.
-
Page 18: Maintenance
MAINTENANCE WARNING! To avoid accidents, make sure the power switch is in the OFF position and the battery is removed from the terminal before cleaning or performing any maintenance. Servicing of the tool must be performed by a qualified technician. ROUTINE INSPECTION 1. -
Page 19: Exploded View & Parts List
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty. - Page 20 20670-026 Screw Spring * NOTE: Model 20670BT does not include a battery or charger. NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of nor- mal use are not covered under the warranty.
-
Page 21: Warranty Statement
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use. - Page 22 NOTES...
- Page 23 NOTES...
- Page 24 THANKS FOR REMEMBERING V. 2022.08.09...
Need help?
Do you have a question about the 20670BT and is the answer not in the manual?
Questions and answers