Stacking The Appliance - LG DLHC1455 Series Owner's Manual

16 INSTALLATION
7
Reassemble the door on the cabinet using the
screws removed in step 1. Make sure that the
door opens, closes and latches properly.

Stacking the Appliance

Stacking Kit Overview
In order to stack the appliance, an LG stacking kit
is required.
Dryer
a
LG Front Load Washing Machine
b
The appliance may only be stacked on top of an LG
front load washing machine. Do not attempt to
stack the appliance on any other washing
machine, as it could result in damage, injury or
property damage.
Shape and Washing Machine Top plate size
assembly
21 7/8 inch
direction
(550 mm)
Tools Required
• Phillips screwdriver
Stacking Kit Installation
• The weight of the appliance and the height of
installation make this stacking procedure too
risky for one person. Two or more people are
required when installing the stacking kit.
• Place the washer on a solid, stable, level floor
capable of supporting the weight of both
appliances.
• Do not stack the washer on top of the dryer.
• If appliances are already installed, disconnect
them from all power, water, and drainage
connections.
1
2
3
23 5/8 inch
(600 mm)
4
5
WARNING
Place the appliance on the top of an LG front
load washing machine.
Remove the 1 screw from the bottom of the
rear cover on each side.
Align the hole in the bracket with the hole in
the rear cover of the appliances.
• If using the 23 5/8" (600 mm) top plate:
• If using the 21 7/8" (550 mm) top plate:
Use the 2 screws removed earlier to hold the
stacking brackets in place on each side.
Use the four 0.6" (16 mm) screws provided in
the accessory box to secure the brackets in
place.