Using Web Configuration Utility - Airlink101 AP431W User Manual

Multi-functional wireless access point

Hide thumbs Also See for AP431W:

Table of Contents

5. Using Web Configuration Utility

You can use the Access Point's built-in Web Configuration Utility to configure the

encryption settings and operating modes. This section describes how to configure the

Access Point's wireless and security settings.

Step 1

Open your Web Browser (Internet Explorer or Netscape), enter the IP Address

of the Access Point (default: 192.168.1.250) in the address bar and press Enter.

Note: If you have changed the IP Address of the Access Point, as described in the

previous section, enter its new IP Address instead of the default.

Step 2

Enter admin for both the User name and Password and click OK.

Table of Contents

Show Quick Links

Table of Contents

Super g ap431w