Advanced Wireless - Airlink101 AP421W User Manual

7.5 Advanced Wireless

The Advanced Wireless page allows you to customize data transmission settings. In
most cases, the advanced settings on this page should remain at their default values.
Beacon Interval: The default value is 100. Enter a value between 20 and 1000
milliseconds. The Beacon Interval value indicates the frequency interval of the beacon.
A beacon is a packet broadcast by the Access Point to synchronize the wireless
network.
RTS Threshold: This value should remain at its default setting of 2347. The range is
256-2347 bytes.
Should you encounter inconsistent data flow, only minor modifications are
recommended. If a network packet is smaller than the preset RTS threshold size, the
RTS/CTS mechanism will not be enabled. The Access Point sends Request to Send
(RTS) frames to a particular receiving station and negotiates the sending of a data
frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS)
frame to acknowledge the right to begin transmission.
36