Fan - HP ProBook 635 Aero G8 Maintenance And Service Manual

3. Lift the top of the touchpad, and then pull it away from the bottom of the computer to remove it (3).
Reverse this procedure to install the touchpad.

Fan

To remove the fan, use this procedure and illustration.
Table 6-10 Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan:
1. Remove the cables from the clips on the side of the fan (1).
2. Disconnect the fan cable from the system board (2).
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 35).
43).
Battery on page 43).
Spare part number
M30650-001