AGT PSG MAK10 Installation Manual, Operating Manual, Maintenance Manual, Spare Part List page 15

Installation-, Operating-, Maintenance-Manual, Spare part List
Components
Moisture Sensor (optional)
The moisture sensor protects downstream analyzers against humidity. This monitoring device reliably
signals a condensate breakthrough in case of failure of cooling devices or failure of condensate drains,
thus avoiding costly downtime and high repair costs. In case of an alarm, sample gas pumps can be
switched off and shut-off valves can be activated. The moisture sensor operates according to the principle
of electric conductivity. Its design ensures that any condensate in the sample gas flow gets directly to the
sensor surface by gravitational force. Even smallest amounts of liquid will trigger a fast and reliable
alarm. Control/alert served by an appropriate electronic control.
FEATURES MS
 Protection against condensate break-through
 Reliable detection of smallest amounts of liquid
 Line break monitoring
 High chemical resistance
 Optional electronic control
Electronic Control Unit (optional)
The electronic control unit serves moisture sensors and light barriers of flowmeters and analyses their
signals. The electronic control unit is equipped with a potential-free directional contact, which triggers an
alarm notification or which switches e.g. a sample gas pump or a shut-off valve. The switch-point of the
electronic control unit can be adjusted by a potentiometer. Standard setup: Function type FS 0,5s release
delay, responsivity 75 KΩ.
FEATURES EC72.01
 Control/alarm for moisture sensor
 Control alarm for flowmeter light barrier
 Potential-free directional contact
 Adjustable switch-point
 LED for operation/alarm notification
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted Translation - Manual MAK10 Rev. 11/2017
MAK10
Page 15