Warranty Certificate - Ayce MJ10250VIIIC Original Instruction Manual

Sympton Possible causes
The material kicks • The rip fence is out of
back from the blade. alignment.
• The riving knife is not
aligned correctly with the
blade.
• The work piece is being
fed without the rip fence.
• The riving knife is not in
place.
• The blade is dull.
• The operator is letting go
of the material before it
has passed the saw blade.
• The miter angle locking
knob is loose.
The blade does not • There is sawdust and/or
raise or tilt freely. dirt in the raising and
tilting mechanisms.
The blade does not • The extension cord is too
reach full speed. light or too long.
• The voltage from the
outlet is too low.
The saw vibrates • The saw is not mounted
excessively. securely to the workbench.
• The stand is on an uneven
surface.
• The blade is damaged.
Corrective action
• Align the rip fence with
the miter gauge slot.
• Align the riving kinfe with
the blade.
• Install and use the rip
fence.
• Install and use the riving
knife (with the guard).
• Replace the blade.
• Push the material all the
way past the saw blade
before releasing the work
piece.
• Tighten the knob.
• Brush or blow out any
loose dust and dirt.
• Replace with the proper
size of extension cord.
• Contact the electricity
supplier.
• Tighten all mounting
hardware.
• Reposition the stand on a
flat level surface.
• Replace the blade.

WARRANTY CERTIFICATE

Congratulations! You have made an excellent choice with the purchase of this quality
product. Our commitment to quality also includes our service.
Jumbo offers an excellent repair service, exclusively in Switzerland, for all 16
ayce Power Tool products.
Should you, contrary to expectations, experience defects due to
material or manufacturing faults during private use within FIVE
YEARS of the date of purchase we shall be liable for warranty in
accordance with statutory warranty regulations, provided that:
- The device was not put to any use other than the intended;
- Was not overloaded;
- Was not used with the wrong accessories;
- Repairs where not carried out by any other than the authorized
workshop;
The warranty certificate is only valid in connection with the receipt. Please keep
both in a safe place. The warranty does not affect your statutory rights. The product
is guaranteed for a period of FIVE YEARS beginning on the day of purchase. Keep
your purchase receipt safe as proof of the date of purchase. The guarantee period
can only be extended for the duration of any repair required. During the warranty
period, defective devices can be returned at every Jumbo store. We will, at
our discretion either repair or exchange the device in accordance with warranty
legislation.
Please include the following when returning your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault
description completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After
the warranty has expired you can still return defective devices for repairs. Quotes
as well as repairs after warranty period are to be paid for in all cases. This warranty
does not affect your statutory rights.
CH-Import & Distribution exklusiv durch:
Jumbo-Markt AG, 8305 Dietlikon
Tel. 044 805 61-11
www.jumbo.ch
216 | 217
GB