8.2
Werkzeug für die Montage / Tools for Installation
Für die Montage der Hebebühne wird zusätzlich folgendes Werkzeug benötigt:
You need the following additional tools to install the lift:
1 x Hammer
1 x Bohrmaschine / Drilling machine
1 x Steinbohrer / Rock-drill Ø16 & Ø8
2 x Schraubenschlüssel / Screw-wrench SW 13, SW 16, SW 18, SW 24
8.3
Montage der Hebebühne / Assembling of the Lift
1. Palette mit Hebebühne zum Aufstellungsort bringen.
Bring the pallet with the lift to the installation site.
2. Ausleger (2), Überfahrrampen (3) und Bühnenzubehör vom Grundkörper (1) herunternehmen.
Remove the outriggers (2), overtravel-ramps (3) and lift-equipment from the main-part (1).
3. Druckluftschläuche auf die Schlauchtüllen des
Handventils (Bedienteil) (9) aufschieben und mit
den
mitgelieferten
fixieren (Abb. 8-1).
Connect the pneumatic-hoses with the hose fitting
on the hand-valve (9) and fix it with the delivered
hose-clamps (10/11) (Fig. 8-1).
Abb. / Fig. 8-2
Carry & Carry XL
Schlauchschellen
(10/11)
9
4. Handventil (Bedienteil) an die kundenseitige
Druckluft anschließen (Abb. 8-2).
Connect compressed-air to the hand-valve (Fig. 8-2).
9
11
Abb. / Fig. 8-1
10
Seite / Page 18