Siemens RDF301 Quick Start Manual page 5

Accessories
Mechanical design
Operation and settings
Siemens
Building Technologies
Designation
Changeover mounting kit
(50 pcs/package)
Plastic mounting bracket for semi-
flush-mount thermostats RDF301... for
increasing the headroom in the conduit
box by 10mm
Conduit box for semi-flush mounted
thermostat RDF301...
KNX Power supply 160 mA (Siemens BT LV)
KNX Power supply 320 mA (Siemens BT LV)
KNX Power supply 640 mA (Siemens BT LV)
The thermostats consist of 2 parts:
 Front panel with electronics, operating elements and built-in room temperature
sensor.
 Mounting base with power electronics.
The rear of the mounting base contains the screw terminals.
Slide the front panel in the mounting base and snap on.
1
3
RDF301, RDF600KN
1 Operating mode selector
2 Change fan operation
3 Adjust setpoint and control parameters
4 Four buttons to control KNX actuators via KNX S-mode
(functions: switching, dimming, blinds control, 8-bit scene)
RDF301. / RDF301.50 / RDF600KN
Semi flush-mount room thermostats with KNX communications
Product no / SSN
ARG86.3
ARG70.3
ARG71 /
S55770-T137
5WG1 125-1AB02
5WG1 125-1AB12
5WG1 125-1AB22
2
1
4
RDF301.50
Data
sheet
N3009
N3009
N3009
--
--
--
2
4
3
5 / 14
CE1N3171en
2012.10-04