Taking a still picture
1. Adjust the focus:
Normally the camcorder can auto focus without adjusting
focus. If you want to take close-up pictures, you can push
the Up button to switch to Macro mode (
Note: Please make sure your memory card is inserted
before recording.
-
30cm ~
5cm ~ 30cm (2" ~ 12")
* At 1.5X fixed zoom
2. Zooming:
Move the Zoom button up or down to zoom in or zoom out the
screen. The optical magnification is 3X.
Adjust other advanced settings if necessary.
If the surroundings are dark, you can switch the LED
lights mode to On or Auto to help focus and lighting.
3. Press the Shutter button half way down and
hold for the camcorder to auto focus. When the
focus frame turns green, press the button fully
down to take a still picture.
Due to the sensor capture feature, the LCD preview and ratio of still picture
capture will vary depending upon different video resolution settings.
The image capture of the camera is set where as video resolutions are different.
Video resolution
HD(1280x720)
D1(720x480)
CIF(352x288)
(12" ~ )
Preview
16:9 ratio
4:3 ratio
).
Zoom in
Zoom out
focus frame
Taking pictures
and focusing
4:3 ratio
4:3 ratio
Need help?
Do you have a question about the GO-HD+ and is the answer not in the manual?