Toyota TERCEL 1985 Repair Manual page 227

IG-14 IGNITION SYSTEM - Integrated Ignition Assembly (HA)
9.
10. ADJUST IDLE SPEED (See page FU-25)
ADJUST IGNITION TIMING
(a) (3A-C)
Disconnect the hose from the vacuum advancer sub-
diaphragm and plug the hose ends.
(b) Using a timing light, slowly turn the HA until the t i m -
ing mark on the crankshaft pulley is aligned with the
o
5 mark. Tighten the HA mount bolt and recheck the
ignition timing.
Ignition timing: 5°BTDC @ Max. 950 rpm
Torque: 130 kg-cm (9 ft-lb, 13 N-m)
(c) (3A-C)
Reconnect the hose to the vacuum advancer sub-
diaphragm.
(d) (3A-C)
Check that the ignition timing advances.
Ignition timing: Approx. 13°BTDC @ Max. 9 5 0 rpm