Toyota TERCEL 1985 Repair Manual page 224

IGNITION SYSTEM — Integrated Ignítion Assembly (HA)
Many Spring Windings
Stopper Pin
3. INSTALL SIGNAL ROTOR SHAFT
(a) Install the signal rotor shaft on the governor shaft as
shown.
(b) Instad the screw.
(c) Pack high-temparature grease into the shaft.
(d) Push on the grease stopper with your finger.
4. INSTALL GOVERNOR SPRINGS
IG0032
5. INSTALL BREAKER PLATE
(a) Align the cutout parts of the breaker píate and hous-
¡ng, and install the breaker píate.
(b) Secure the breaker píate with the two píate washers
and screws.
6. INSTALL VACUUM ADVANCER
Connect the advancer link hole to the breaker píate pin and
install the advancer with the screw.
IG-11