Teknik SMARTBAY One Box User Manual page 2

INTRODUCTION
Thank you for selecting the [SMARTBAY] "One Box" LED Highbay. Please ensure that the luminaire
is installed in accordance with the below instructions. Teknik Lighting Solutions Pty Ltd assumes
no responsibility for inappropriate use or installation of the product, including any associated damage
caused.
5 year warranty
\
5 option wattage switchable functionality
\
Unique heat sink design to reduce dust
\
build up
PRECAUTION
1.
Read the entire manual carefully prior to
installation and operation.
2.
The warranty period is listed on the product as
well as on the packaging. Teknik will repair or
replace the product if it becomes defective under
normal use due to a manufacturing defect within
the prescribed period.
3.
Declared lumen output is based upon
measurements obtained during operation on
the appointed LED electronic driver under
standardised laboratory conditions.
4.
Installation must be performed by a licensed and
qualified electrician, in accordance with these
instructions and relevant Australian Standards.
5.
Instant restart is allowed.
6.
Do not change or tamper with any internal electric
circuits, add any wires, connectors or cables for
any reason.
5/26-34 Dunning Ave, Rosebery NSW 2018 | 1300 313 780 | info@tekniklighting.com.au
www.tekniklighting.com.au
Smart hook system for easy and quick
\
installation
Integrated motion and daylight sensor for
\
intelligent lighting control
7.
Please do not insert any physical objects of any
nature into the fitting as this may cause electric
shock, malfunction or damage to the products.
8.
Before replacement of the fitting turn the power off
and allow to cool down.
9.
In case of weight discrepancy when replacing old
lamps, please ensure that the mounted structure
is rated to withstand the weight of the new lamp
and installation materials.
10.
For further information, please contact Teknik
(www.tekniklighting.com.au) or your local
distributor.