Teknik SMARTBAY One Box User Manual page 10

DISCLAIMERS
1.
This product must be installed and used as per these instructions.
2.
This product contains no serviceable parts and no attempt should be made to repair this product. If the
product is faulty it should be discarded.
3.
This product is not suitable for installation in hazardous and/or corrosive areas.
4.
Electrical installations periodically receive transient over voltages. This product has been designed to minimise
the effect of such voltages on connected equipment. It may not give full protection for extreme over-voltage
transients such as those resulting from a close lightning strike.
5.
This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such
intellectual property remains the property of Teknik Lighting Solutions Pty Ltd in all cases.
6.
This product has been designed to operate in ambient temperatures -40
5/26-34 Dunning Ave, Rosebery NSW 2018 | 1300 313 780 | info@tekniklighting.com.au
www.tekniklighting.com.au
C to + 50 C.
o o