Patemperature Control - Hitachi EC702HP Operation Manual

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.5.17
Through this screen you can configure the operating temperature of the power amplifiers drawer.
Note:
For details on setting the temperature, see the Activation section.
Manual Rev. 0.0 - August 2016
PA Temperature Control
>
>
Select PA Temperature Control and press ENTER.
The following screen will be displayed:
> >
Use the key  or  to set up. Confirm the selection by pressing ENTER.
The temperature amplifier (PA) can be adjusted from 50ºC to 60ºC.
55 .0
5-29