Appearance Problem - Sony Ericsson S700i Troubleshooting Manual, Mechanical

2 Appearance Problem

•
Make a general visual inspection for misuse, corrosion or oxidation from liquid damage
according to point 1.2
•
Check the Case LCD front (Fig. 2.1), the Case Key rear (Fig. 2.2), the Case LCD rear
(Fig. 2.3), the Case Key front (Fig. 2.4) The Panel LCD rear (Fig. 2.3), the Panel LCD
front (Fig. 2.4) and the battery cover (Fig. 2.2) for damage, scratches and if the parts fit
correct. Replace the faulty component(s) if necessary.
•
Check the Panel Camera, (Fig. 2.5) and the Cover Camera left and right (Fig. 2.5) for
damage, scratches and if the parts fit correct. Replace the faulty component(s) if
necessary.
•
Check the button key (Fig. 2.4), the button LCD top, side and centre (Fig. 2.1), the button
shutter (Fig. 2.6) and the button lock switch (Fig.2.7) for damage, scratches and if the
parts fit correct. Replace the faulty component(s) if necessary.
•
Check the panel IRDA (Fig. 2.8), the light guide (Fig. 2.7), the cover MS (Fig. 2.9), the
cover system connector I/O (Fig. 2.10) and the cover R/F (Fig. 2.11) for damage, scratches
and if the parts fit correct. Replace the faulty component(s) if necessary.
If the failure still occurs, handle the unit according to the local directives.
4/00021-1/FEA 209 544/89 A

Company Internal Sony Ericsson Mobile Communications AB
Fig. 2.1
Trouble Shooting Guide, Mechanical
Fig. 2.2
6(26)