Selecting And Programming Radio Stations; Scanning Radio Stations; Cd Operation; Inserting And Removing A Disc - Telefunken MC1002M Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

5.
RADIO OPERATION
5.3

Selecting and programming radio stations

Press
remote control repeatedly to manually search for radio stations.
Press once to move in increments of 0.05 MHz. Press and hold
or TUN+ (29) / TUN- (43) keys on remote control to automatically switch to the next
available radio station.
The FM stereo indicator ST lights up when a strong stereo signal is found. This provides
the best sound for radio stations with a strong signal. Use ST/MONO (34) key on
the remote control to switch between stereo and mono radio signal - mono signal is
recommended for radio stations with weaker signal.
To save the radio station that the radio is tuned to, press MEMORY (35).
or the next available program number appears on the display (2).
Use
preset station list. Up to
Press MEMORY (35)
To select one of the preset stations, repeatedly press
remote control.
5.4

Scanning radio stations

Press and hold AUTO (32)
frequencies in your
Select saved radio stations by using the numeric keys (23) or
the remote control.
6.

CD OPERATION

This appliance reads CD, CD-R/-RW and MP3-CD discs. Other discs are not supported
by this appliance.
slowest burning speed.
The appliance will automatically switch to the standby mode about 13 to 16 minutes
after:
– pressing PLAY
– pressing STOP
To continue using the appliance at standby mode, press
the remote control to switch on the appliance.
6.1

Inserting and removing a disc

Press repeatedly SOURCE (8, 31) on the main unit or on the remote control to select CD
operation mode.
Open the disc compartment by pressing the lid release (7) marked PUSH located on the
disc compartment lid.
Remove the protective card from the inside of the disc compartment and insert a CD
with labelled side upwards.
Press the disc compartment lid downwards to close the disc compartment.
(12) /
(14) keys on the main unit or TUN+ (29) / TUN- (43) keys on the
(27) /
(44) keys on the remote control to select the desired position on the
30 stations can be saved to the memory (
or
STOP
area and save them in the memory. Up to 30 radio stations can be saved.
(5) on the main unit or
(9) to stop playback.
(27) /
(9) on main unit for 5 seconds to scan all available radio
(45) on the remote control;
25
(12) /
(14)
to
).
(44) keys on the
(27) /
(44) keys on
(6, 48) on the main unit or on
EN

Advertisement

Chapters

Table of Contents
loading

Table of Contents