Test The System - KVH Industries TracPhone V30 Installation Manual

TracPhone V30 Installation Guide

Test the System

Follow these steps to test the system for proper operation.
1. Ensure the antenna has a clear, unobstructed view of
the sky.
2. Verify that the antenna is tracking the service satellite
and the system is online, as indicated by the Home tab
of the TracPhone V30 web interface.
Figure 38: Good Service Connection Indicated in Web Interface
3. On the Terminal tab, make sure the vessel's heading is
displayed in the Real-time Vessel & VSAT Satellite
Display. If not, check the wiring to the NMEA talker.
Figure 39: Heading Displayed in Web Interface
4. Enter the following address in the web browser:
http://test.minivsat.net.
24
5. Verify that the Welcome screen appears, indicating
good communication between the TracPhone V30
system and the land-based hub.
Figure 40: Welcome Screen for Testing
6. Turn on all other electronic equipment above deck
within the proximity of the antenna. Verify that the
system continues to operate without any degradation
in performance.
7. Fill out the Installation Checklist (provided in the
Customer Welcome Kit) and return it to KVH. Refer to
the instructions on the form.
IMPORTANT!
Submission of the Installation Checklist is required to
certify the quality of the installation.
Test the System