Table of Contents
Advertisement
ENGLISH
MP3 c opying
1. In CD-MP3, USB or SD card playback mode, press REC (32) to start MP3 copying from CD to USB/SD card, or USB to SD
card or vice versa. Playback will be stopped and system will scan the contents of USB/SD card and create folder to store MP3
track.
2. icon " REC displayed
3. Message COPY 01 will be displayed, the proportional copied percentage will be shown on the decimal number.
4. The target device icon "USB" or "CARD" start flashing, the decimal number will be increment from 01 as MP3 copying starts,
the process will stop as it reach 100
5. Current MP3 will be playback from beginning
From Phono to SD / USB
The system is capable to convert audio signal from PHONO input to MP3 format and store in USB mass storage device or SD
card (default USB if both devices are detected)
1. Press the FUNCTION (10/55) to set the unit to PHONO mode.
2. Press REC (32) to start ripping, the system will scan the contents of USB/SD card and create folder to store MP3 tracks.
3. Icon " REC " and message " RIPP TO" are displayed, icon " PHONO " start flashing.
4. The target device icon " USB " or " CARD " start flashing as ripping begins.
5. Press STOP (7/38) to exit PHONO ripping
From AUX to SD/USB
The system is capable to convert audio signal from AUX input to MP3 format and store in USB mass storage device or SD card
(default USB if both devices are detected).
1. Press FUNCTION (10/55) once or more to select AUX
2. Press REC (32) to start ripping, the system will scan the contents of USB / SD card and create folder to store
MP3 track.
3. Icon "REC" and message " RIPP TO " are displayed, icon " AUX " start flashing.
4. The target device icon " USB " or " CARD " start flashing as ripping begins.
5. Press STOP (7/38) to exit AUX ripping
Note: The message " NO FUNCT " will be displayed if any key pressed during AUX ripping process. The message
" NO DEV " will be shown if neither USB or SD card not detected. The message " FULL " will be displayed if not enough memory
in target device.
De le te MP3 tra cks
The system support deleting previous recorded MP3 or existing files.
1. In USB or SD card playback mode, press and hold REC (32) for 2 seconds,current playback track is stopped and will be deleted.
2. Message " delete " is displayed
OPTIONAL EXTERNAL SPEAKERS
1. With your new radio, you have the option of adding external speakers.
2. The speaker jacks for external speakers (19) are located on the back of the radio.
Along with the speaker jacks is a switch labeled Int./Ext. (18)
When using external speakers, this switch must be switched to the EXT. position. Doing this turns off the internal speakers in the
radio and redirects the power to the external speakers.
3. If you decide not to use the external speakers, be sure the switch is switch to INT.
10
ESPAÑOL
UBICACIÓN DE LOS CONTROLES
CONTROLES DE LA UNIDAD
1
. ALTAVOZ
2. SENSOR
3. INDICADOR DE STANDBY
4. PANTALLA LCD
5. Botón OPEN/CLOSE CD
6. Botón PLAY/PAUSA
7. Botón STOP/BAND
8. Botón SALTAR ATRÁS/-
9. Botón SALTAR DELANTE/+
10. Botón FUNCTION
11. PUERTA DEL CD
12. Botón POWER/STANDBY
13. CABLE DE CORRIENTE
14. ANTENA EXTERNA
15. CONECTOR SUBWOOFER
16. CONECTOR ENTRADA AUX
17. CONECTOR AURICULARES
18. INTERRUPTOR ALTAVOZ INT/EXT
19. CONECTOR ALTAVOZ EXTERNO
20. RANURA PARA SD
21. PUERTO USB
22. TOCADISCOS
23. EJE
24. ADAPTADOR PARA DISCOS DE 45 RPM
25. PALANCA ELEVADORA
26. BRAZO
27. INTERRUPTOR DE CONTROL DE VELOCIDAD
28. SOPORTE DEL BRAZO
CONTROLES DEL MANDO A DISTANCIA
29. Botón POWER/STANDBY
45. Botón 8
30. Botón EQ
46. Botón 9
31. Botón PRESET +
47. Botón 5
32. Botón REC
48. Botón MONO/ESTÉREO
33. Botón PRESET -
49. Botón 2
34. Botón PLAY/PAUSA
50. Botón TIMER
35. Botón SALTAR ATRÁS / -
51. Botón REPEAT
36. Botón RANDOM
52. Botón PROGRAM
37. Botón ID3
53. Botón SALTAR DELANTE / +
38. Botón STOP/BAND
54. Botón VOLUME -
39. Botón 0
55. Botón FUNCTION
40. Botón 1
56. Botón VOLUME +
41. Botón 3
57. Botón SLEEP
42. Botón 4
58. Botón MUTE
43. Botón 6
59. Botón CD OPEN/CLOSE
44. Botón 7
47
Advertisement
Table of Contents
