Functional Description; Assembly Instructions - Grizzly EFB 402 Original Instructions For Use

Functional description

The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, two different brushes can be used
for cleaning joints.
The telescopic arm enables a comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.

Assembly instructions

Height-adjustable mounting of the
brush box:
Œ
Slide the brush box (10) along the
guide rails (21) on the motor head
(13) until it clicks into one of the two
possible positions (22).
Inserting/replacing the brush:
1. Push the brush support (23) to-

wards the motor head (13) and
insert the desired brush (12).
2. Release the brush support (23)
to let it return to the initial posi-
tion.
3. To remove the brush, push the
brush support (23) and remove
the brush.
The spare brush is released from
the spare brush holder (
pressing the release button (
17).
Install guiding roller:
Insert the guiding roller (14) on to the
Ž
motor head (13). It locks into place
audibly. Only one position is possible.
Mounting the additional handle:
1. Unscrew the additional handle

2. Insert the additional handle (16)
3. Screw the additional handle (16)
Unit assembly:
1. Unfasten the screw socket (9)

2. Insert the telescopic tube (8) into
25) by
3. Turn the screw socket (9) until it
The spare brush is fixed into the
holder by pressing the brush with
the hexagon into the hexagon slot
of the holder (
(16).
into the holder (24) underneath
the handle (1).
The spare brush holder (25)
must point towards the telesco-
pic tube (8).
tightly with the star-stud screws
(26).
There are 5 possible positions.
and place the telescopic tube (8)
into the screw socket (9).
There is only one position for the
telescopic tube in the screw so-
cket; note the position of the slot
for this on the telescopic tube.
the screw socket (9) as far as it
will go.
is hand-tight.
If the telescopic tube (8) is not
pushed in as far is it will go, the
appliance will not start!
GB
25) until it clicks.
21