Electrolux GA60SLVSCN User Manual page 7

Delay start area (A) - How to set
the delay start
You can delay the start of the programme
from 1 to 24 hours.
If you want to set options
with the programme, this
must be done before setting
the delay start. It is not
possible to delay the start of
the MyFavourite programme.
1. Use the navigation keys to select the
Delay start area.
2. Press the OK key to confirm.
The display shows the programme list.
3. Use the navigation keys to scroll the
programme list and select a
programme.
4. Press the OK key to confirm.
The display shows 3 columns.
• Delay: in this column you see the
number of hours of the delay.
• Start: in this column you see the
start time of the programme.
• End: in this column you see the
end time of the programme.
5. Use the navigation key on your right
and select the hours of the delay start.
As the number of hours increases the
values in the columns Start and End are
updated. To decrease the number of
hours, use the navigation key on your left.
6. Press the OK key to confirm.
7. Close the door to start the
countdown.
When the countdown is completed, the
programme starts.
Programs area (B) - How to set
a programme
This area shows the programme list and is
selected by default when you activate the
appliance. If the area is not selected,
press Program.
1. Press the OK key.
The display shows the programme list.
2. Use the navigation keys to scroll the
programme list and select a
programme.
3. Press the OK key to confirm.
4. Close the door, the programme starts.
Options area (C) - How to set
options and settings
If you want to set options with the
programme, this must be done before you
select a programme. When the
programme is completed or is cancelled
the options are set to the default value.
When a setting is changed it will remain
valid even if the programme is completed
or a running programme is cancelled.
1. Use the navigation keys and select the
Options area.
2. Press the OK key to confirm.
The display shows the option and setting
list.
3. Use the navigation keys to scroll the
list and select an option or a setting.
4. Press the OK key to enter the value
level.
5. Use the navigation keys and select the
new value.
6. Press the OK key to confirm.
The display shows the 3 areas.
If you want to set another option or
change the value of another setting,
repeat the procedure.
ENGLISH 7