Letscom ID205S User Manual page 19

1. Go to your smartphone Settings, find VeryFitPro app and
enable the Location and all Notifications.
2. Enable your phone's Bluetooth and go to the VeryFitPro app
to bind the watch.
3. Enable the Call / SNS Alert function, and tap "√" to save your
settings.
4. Check if the "Non disturb mode" function is enabled in the
app, you will not receive message on the watch during the
Non-disturb-mode period.
Failure to connect to smartphone
The watch will disconnect from your smartphone in the following cases:
1. Smartphone Bluetooth is off or exceeds the Bluetooth
connection range (the maximum Bluetooth connection range
is 10 meters and can easily be reduced by walls, furniture,
etc.)
2. The VeryFitPro app is closed on the phone. (This can occur
automatically under certain circumstances.)
To reconnect the watch to your smartphone, please kindly take the
following steps:
1. Go to your smartphone system Settings, find the VeryFitPro
app and enable the Location and all Notifications.
2. Clear all running / background processes on your
smartphone. Go to the VeryFitPro app and swipe down
"Homepage", then the watch will reconnect to your
smartphone and update data. You can also restart your
smartphone and Bluetooth, then rebind the watch in the app.
- 17 -