Waking A Dimmed Screen; Watch Interfaces; Function Introduction; Customize Your Home Screen - Letscom ID205S User Manual

Waking a Dimmed Screen

To conserve power, the watch has a standby mode in which the
screen turns off. To wake the screen, please follow the following
steps:
● Turn your wrist towards you, and the screen will display time.
● Tap the touch key, and the watch will display the main screen.

Watch Interfaces

Tap the touch key to look through different interfaces / go to
different functions:
"Outdoor Walk", "Outdoor Run" and "Outdoor Cycling" are
※1:
displayed on the device screen by default. You can set up
to 3 different sports modes from 11 sports modes to
display on the device screen (Go to "VeryFitPro" APP →
"Device" → "More"→ "Activity display").
"Alarm Mode" is displayed on the watch screen only when
※2:
alarm alert(s) is / are added and enabled in the app
("Device" page → "Alarm Alert").

1. Customize Your Home Screen

You can customize the home screen by
following the steps below:
1) Tap and hold the touch key.

Function Introduction

- 9 -