Garden Games Playhouses Whacky & Crooked Tower Instructions Manual page 8

9
You will need:
Leg Support Braces x 8 (parts 28)
16 x Screws D (4 x 50mm)
Secure the base of the frame using eight support struts
(parts 28) to attach diagonally between leg and frame.
These are screwed in place using two Screws 'D' for each
brace.
10
You will need:
Pre-assembled Playhouse Tower Base from Steps 5 - 7
House Floor Frame Pieces - Parts 33 (x 2), 34 (x 2) and 35 (x 1)
14 x Screws A (4 x 50mm)
Create the frame for the house floor by screwing together parts 33, 34 and 35 in the formation as shown in
diagram 10a below. Use ten Screws 'A' to fix together the frame.
Then use a further four Screws 'A' to attach the frame on top of the main base frame (see diagram 10b - frame is
highlighted in green).
part 33
part 34
11
You will need:
Pre-assembled Playhouse Tower Base from Steps 5 - 8
Veranda Floor (part 22)
Playhouse Floor panels x 2 (parts 17)
Place the veranda floor onto the playhouse tower base. This should just slot into place. Then place the two floor
panels in place and secure using four Screws ''C' .
7
Building the Tower Platform: Attach the Leg Support Braces
Building the Tower Platform: Creating the Frame for the House Floor
part 34
part 35
part 33
Screw
A
diagram10a
Building the Tower Platform: Adding the Veranda and Floor Panels
x10
4 x Screws C (5 x 80mm)
Screw
D
diagram 9
diagram10b
x16
Screw
A
x4