Advertisement
1
You will need:
Parts 1, 2, 3 & 4
10 x Screws A (4 x 50mm)
Create the main frame of the house by screwing the walls (parts 3 & 4) to the front (part 1) and back (part 2) of the
house using ten Screws 'A' - as shown in diagram 1 below.
Screw
A
2
You will need:
Chimney Parts - parts 8, 9, 10, 11 & 12
Assemble the chimney by fixing the back part of the chimney (part 11) to the sides (parts 9 & 10) using four screws
'B' (two either side) then the front (part 8) using six screws 'B' (three either side) as in diagram 2.
Finally add the top of the chimney (part 12) using four more screw 'B's.
Screw
B
3
Building the Main House: Assemble the Walls
Building the Main House: Assemble the Chimney
x10
diagram 1
14 x screws B (4 x 30mm)
diagram 2
diagram 1a
Screw
B
x4
2
Advertisement
