Advertisement
Quick Links
Advertisement
Summary of Contents for Garden Games Playhouses Whacky & Crooked Tower
- Page 1 Whacky & Crooked Tower Instructions...
-
Page 2: Tools Required
Tools Required Benötigtes Material / Accessoires / Herramientas Strumenti da lavoro / Benodigdheden Two pairs of Crosshead Parts Included hands Screwdriver *we recommend using an electric Unterteile / Liste des pièces / Lista de partes screwdriver for ease, but a Elenco degli elementi / Onderdelen manual will work - you will just need a little more elbow grease! -
Page 3: Before Installation
Before Installation Check all parts are present! Our factory takes every effort to make sure everything is packed in its proper place. But just in case a small part has gone astray please make sure you check every piece is present before you begin installing - right down to the screws. Assemble with Care Installation should be completed by two adults. - Page 4 Building the Main House: Assemble the Walls You will need: Parts 1, 2, 3 & 4 10 x Screws A (4 x 50mm) Create the main frame of the house by screwing the walls (parts 3 & 4) to the front (part 1) and back (part 2) of the house using ten Screws ‘A’...
- Page 5 Building the Main House: Attach the Chimney to the Roof You will need: Assembled chimney from step 2 (parts 8 -12) Large Roof Panel (part 6) 4 x Screws B (4 x 30mm) Screw the chimney to the roof panel by using four screws ‘B’ . The screws should go through the pre-drilled holes on the underside of the roof panel and into four corners on the underside of the chimney.
- Page 6 Building the Main House: Complete the Playhouse Roof You will need: Roof ridge and finials (2 x parts 7a & 7b) 9 x Screws B (4 x 30mm) Complete the roof of the playhouse by screwing on the roof ridge (part 7b) using five screws ‘B’ . Then add the finials (parts 7a) using four more screws ‘B’...
- Page 7 Building the Tower Platform: Assemble the Front Legs and Balustrades diagram 7 You will need: Front Balustrades (part 18) 6 x Screws C (5 x 80mm) Two Front Uprights/Legs (part 19 & 20) Front Cross Piece (part 25) Create the front of the playhouse tower by fitting part 25 Screw horizontally into the slots on parts 19 and 20 (to form the cross piece).
- Page 8 Building the Tower Platform: Attach the Leg Support Braces You will need: Leg Support Braces x 8 (parts 28) 16 x Screws D (4 x 50mm) Secure the base of the frame using eight support struts Screw (parts 28) to attach diagonally between leg and frame. These are screwed in place using two Screws ‘D’...
- Page 9 Completing the Playhouse: Assemble the Steps You will need: Steps x 3 (parts 32) Step Side Pieces (parts 30 & 31) 12 x Screws A (4 x 50mm) Build the steps for the house by attaching them to the side rails using four Screws ‘A’ per step (two on either side) as shown in diagram 12..
- Page 10 Attach the Window & Door Handles You will need: 6 x Wooden Door & Window Handles 3 x Handle Screws Attach the door and window handles by inserting the handle screws into the pre-existing holes and screwing the wooden knobs on. ensuring these are fully tightened. Your playhouse is now ready for your little one’s many adventures...
-
Page 11: Inspection And Maintenance
Inspection & Maintenance We recommend the following maintenance. Looking After Your Playhouse Your playhouse is made from heat-treated and pre-painted natural wood. It is also protected from insect infestation and fungal growth, and sourced from sustainable forests. The pre-painted colour stain includes a mould inhibitor and UV protection to keep the colours vibrant, but it is strongly recommended that you re-treat the house once a year with a clear timber preserver to extend the life of your playhouse. - Page 12 The logo to look out for... There are many more products we have created - just look out for our Garden Games logo or flower emblem to be sure you have an official Garden Games Limited product.