Aiphone JF-2MED Installation & Operation Manual page 6

4
MOUNTING
Back wiring
Peel off the protective film
from the display surfaces
of the JF-2MED and JF-
2HD.
1. Press the RELEASE button (to insert or
remove the wire).
2. Insert the cable into the terminal.
Surface wiring
* When a 1-gang box is not mounted,
the cable can be surface-run to the top
or bottom of the unit. Cut the cable
inlet to allow passage of the wiring
into the unit.
Wood mounting screws x 2
5
NAMES
JF-2MED
[2]
[3]
[7]
[8]
[9]
[1] Microphone
[2] Color LCD video monitor (3-1/2" color)
[3] CALL button, door call-in LED (red)
[4] PLAY button, play LED (red)
[5] REC button, record LED (red)
[6] MENU/MEMO button, memo LED (red) (JF-2MED)
MENU button (JF-2HD)
[7] POWER switch
[8] MONITOR button
Mounting screws x 2
JF-2MED
JF-2HD
83,5 mm
(3-5/16")
Mounting bracket
[1]
[12]
[4]
[13]
[5]
[6]
[14]
[15]
[10]
[11]
[9]
[10] Transmit LED (red)
[11] TALK button
[12] Screen brightness control
[13] Receive volume control (high to off)
[14] Chime tone, alert sound volume (high to off)
[15] Call-in setting switch
1-gang box
83,5 mm
(3-5/16")
Mounting bracket
1
2
9mm
(3/8")
PS-1820
Mounting bracket
1-gang box
83,5 mm
(3-5/16")
JF-2HD
[2]
[3]
[7]
[8]
[9]
Speaker
"1": Call-in from door station 1 only.
"2": Call-in from door station 2 only.
"1&2": Call-in from both door station 1 and door station 2.
- 6 -
PS-1810DIN
Din rail
[1]
[12]
[4]
[13]
[5]
[6]
[14]
[15]
[10]
[11]