Becker Centronic TimeControl TC511 Assembly And Operating Instructions Manual page 55

SETTING
Prog2 END LIMIT (Time/position programming)
Note
This dialog window will only be displayed if a time is set in PROG2.
1. You have confirmed the PROG1 END LIMIT menu level. PROG2 END LIMIT will
appear.
2. You can select PROG 2 END LIMIT, PROG 2 INTERMEDIATE POSITION and
PROG 2 VENTILATION/REVERSE using the +/- button.
3. Confirm your selection by pressing OK.
4. The function PROG2 POSITION has now been set.
5. Please read on for further programming options using the SETTING
menu.
de
en
fr
nl
55