Becker Centronic TimeControl TC511 Assembly And Operating Instructions Manual page 52

Assembly and Operating Instructions
PROGRAMME
PROG2/OFFSET (e.g. Time shutters are lowered to ventilation position in the
evening)
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until PROGAMME ap-
pears.
3. Confirm by pressing OK.
4. Press the + button until PROG2 appears.
5. Confirm by pressing OK.
6. Press the + button until the OFFSET menu appears.
7. Confirm by pressing OK.
8. You can set the time for the DOWN control command to be triggered sep-
arately using the +/- button (max. +/- 240 mins, depending on PROG1
SWITCHING TIME t). Confirm your entry by pressing OK.
9. Press the MENU button to switch to operating mode.
Note
Using the SETTING menu level, you must enter the switching time of the
intermediate position and select PROG 2 VENTILATION for the position
of the end limits.
52