Becker Centronic TimeControl TC511 Assembly And Operating Instructions Manual page 51

PROGRAMME
PROG2/ INDIVIDUAL WEEK (Individual switching time st for week)
PROG2/ INDIVIDUAL BLOCK (Individual switching time st for block1/2)
PROG2/ INDIVIDUAL INDIVIDUAL (Individual switching time st for individual
day)
Press the MENU button.
1.
2. To select the PROGAMME menu, press the + button until PROGAMME ap-
pears.
3. Confirm by pressing OK.
4. Press the + button until PROG2 appears.
Confirm by pressing OK.
5.
6. Press the + button until INDIVIDUAL appears.
Confirm by pressing OK.
7.
Now select the PROG2 INDIVIDUAL function you require using the +/- but-
8.
tons:
INDIVIDUAL week
Press OK for the WEEK menu level (1-7). All further entries now refer to
every day of the week.
INDIVIDUAL block
Press OK for the BLOCK menu level (BLOCK 1 1-5, BLOCK 2 6,7). All fur-
ther entries now refer to BLOCK 1 (1-5) and BLOCK 2 (6,7).
INDIVIDUAL individual
Press OK for the INDIVIDUAL menu level (1,2,3,4,5,6,7). All further entries
now refer to every individual day of the week.
9. Now set the SWITCHING TIME s and the SWITCHING TIME t using the
+/- buttons. Confirm your entry by pressing OK.
10. Press the MENU button to switch to operating mode.
de
en
fr
nl
51