Advertisement
Step25 Use PH1 screwdriver to loose the screws and remove
PSU from Chassis
Step 27 Use PH1 to unscrew screws to loosen top cover.
Step 29 Use PH1 screw driver to loose the screws and
remove PCBA away from bottom chassis
Step 31 Disconnect fan cable from MB and remove the
fan
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
Step 26 Remove the battery from the system board
Step 28 Remove the cover from chassis.
Step 30 Use PH1 screw driver to loose the screws
Step 32 Heat the solder of the Electrolytic Capacitors of greater
than 2.5cm in diameter or height and Remove it
EL-MF877-01
Page 7
Advertisement
