Safety Instructions; Technical Specifications - Polaroid Play+ 3DPen User Manual

SAFETY INSTRUCTIONS

WARNING

TECHNICAL SPECIFICATIONS

Model No.
Power Requirement
Pen Size
Filament
USB Cable
Guarantee
Safety
3 Speed Settings
7
WARNING - BURN HAZARD: Parts of this product get very hot during use
(approx. 180 - 200°C / 356 - 392°F). DO NOT touch the tip of the pen, the
surrounding area (where you see this sign
it could cause a BURN.
Before storage always allow the product to completely cool after use.
This product IS NOT A TOY.
This product is suitable for ages 14+ unless under adult supervision.
Please read this Quick Start Guide carefully before use.
If switched on, always put the pen back in its holder when not in use.
Play
3D-FP-PL-2005-00
A 5.0 Volt DC, 2 Amp (minimum) power adapter
2.0A) MUST be used. IMPORTANT: Using an
(5.0VDC
incorrect power adapter will result in the Pen not working
correctly.
168 (l) x 24 (w) x 33 (d) mm
6.61 (l) x 0.94 (w) x 1.29 (d) inch
PLA, Deluxe Silk, Multi-Colour, Glow-in-the-Dark, P-Wood.
Type-C to USB-A 1.5m / 4.9ft
12 Month Manufacturer's Guarantee (this may differ by state/
country according to minimum statutory requirements).
Auto Turn-off after 8 mins, for added safety.
Rapid, Normal, Fine
3D Pen
+
), or the melted plastic as