Operating Instructions - Skil PWRCORE 12 RW5763A-00 Owner's Manual

12v brushless ratchet wrench
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them . Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
alteration or modification is misuse and could result in a hazardous condition leading to
possible serious injury.
WARNING
when assembling parts, making adjustments, cleaning, or performing maintenance .
This cordless ratchet wrench must be used only with the battery packs and chargers listed
below:
2Ah
SKIL BY500101
SKIL BY519901
NOTICE: Please refer to the battery and charger manual for detailed operating information.
To Attach/Detach Battery Pack
(Fig .2)
Setting the lock-off switch in "LOCK" position
before attaching or detaching the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with
the grooves on the bottom of the tool, and then
slide the battery pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery pack out and remove it from the tool.
NOTICE: When placing the battery pack in the tool, be sure that the raised rib on battery pack
aligns with the groove inside the tool and that the latches snap into place properly. Improper
attachment of the battery pack can cause damage to internal components.
WARNING
when the tool is not in use or when carrying the wrench at your side .
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this Ratchet Wrench or create accessories
not recommended for use with this Ratchet Wrench . Any such
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the Ratchet Wrench
Battery Pack
SKIL BY519801
Battery tools are always in operating condition . Therefore, always set
the lock-off switch in "LOCK" position and remove the battery pack
4Ah
SKIL QC535701
SKIL SC536501
Fig. 2
Charger
Attach
Battery-Release
Button
Detach
11

Advertisement

Table of Contents
loading

Table of Contents