Page 1
Installation and operating instructions Support system for displaying and monitoring the preload force on lashing straps - iGurt BPW-BA-iGurt 37842001e...
Operating the iGurt ........................Page 10 Using the iGurt app ........................Page 10 Troubleshooting ..........................Page 11 Specifi cations ..........................Page 11 Valid: 01/03/2020 1st edition Subject to change without notice. Current version and additional information can be found online at www.bpw.de...
The app is available in the Google Play Store under "BPW iGurt - the intelligent load securing system". If you do not have access to the Play Store, the APK (App installation fi le) is also available at www.iGurt.de.
• Aside from the detachable parts (locking bolts, battery compartment lid and batteries), do not take the device apart. • Only use original parts and kits from BPW (iGurt replacement parts) or qualifi ed partners (lashing straps). Only use the recommended tools, as described in the corresponding BPW instructions.
Disposal methods When disposing of electronic components, in particular in regard to products with integrated batteries or recharge- able batteries, make sure to comply with regional regulations or send the products back to BPW. Guarantee information for guarantee/warranty The latest version of our Terms and Conditions of Sale and Delivery shall apply.
Page 6 BPW-BA-iGurt 37842001e Installing the iGurt To install the iGurt on the fi xed end of the lashing strap, complete the steps described in the following section. No tools are necessary for the installation. Operate the locking springs on the right-side of the iGurt by pushing with your fi...
Page 7
BPW-BA-iGurt 37842001e Page 7 Installing the iGurt Position the iGurt just above the marked area on the lashing strap and fl ip the iGurt shut. Please en- sure that only the top of both pieces of the lashing strap are inside the iGurt.
Page 8 BPW-BA-iGurt 37842001e Changing the batteries Carry out the steps described in the following section to change the batteries. To open the battery lid, it is necessary to use a one-pence or fi ve-pence piece or a similar object as a levering tool as injuries to the fi ngers and fi...
Page 9
BPW-BA-iGurt 37842001e Page 9 Now remove the batteries (3 x AAA), clean the bat- tery contacts and paying careful attention to the correct polarity of the new batteries when inserting them (direction of insertion). After inserting the last battery, the system will automatically calibrate.
Page 10 BPW-BA-iGurt 37842001e Operating the iGurt Using the iGurt app Operating the iGurt • After installing the iGurt on the lashing strap, it may be used like a conventional lashing strap in compliance with the safety and usage instructions.
If a problem arises relating to the iGurt's performance, fi rst try to reinsert or replace the batteries to reset the device. If a problem with the app arises, fi rst restart the app or the smartphone. If these actions do not fi x the problem, please contact BPW. Specifi cations Features Specifi...
Page 12
Your partner on the path to economic viability BPW Bergische Achsen Kommanditgesellschaft Postbox 12 80 · 51656 Wiehl, Germany · Phone +49 (0) 2262 78-0 info@bpw.de · www.bpw.de...
Need help?
Do you have a question about the iGURT 5E and is the answer not in the manual?
Questions and answers